2001 MSI QI-1000, Drilling Equipment, Date of assembly March 27, 2001 model QI 1 000 SX 3.5 L5 01 serial number 840-9370 plunger size 3.5 max work pressure 10.4 max horsepower 1000Date of assembly May 15, 2008 stroke 6 inches part number GR 80011 serial number 848-4076 gear ratio 4.6:1 max load 100 max horsepower 1000 Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

2001 MSI QI-1000 Drills / Drilling Equipment EQUIPMENT

Industrial Diesel

2022 VERMEER, PD5R Drills - Vertical, Rotating platform/driver, Wireless Remote, Auto Plumb Feature, With Trimble LR410 receiver, 48Hp Cat C2.2 4 Turbo Diesel Tier 4 final, 12 in Rubber Tracks, Maximum pile height - 15', Impact drive type: High-frequency hammer, Maximum hammer impact: 1500 bpm, Maximum hammer energy: 950 Joules, Machine weighs: 10,400 lbs, Travel Speed of 2.4mph.Serial Number:

2022 VERMEER PD5R Drills / Drilling Equipment EARTHMOVING

Southern Plains Equipment

2015 SANDVIK, DINO DC400RI Drills - Vertical, Tier 4, Volvo 4 Cylinder Diesel Engine, Requires Diesel Exhaust Fluid, 16 ft Boom, 22 ft Mast, Rod Changer, Dust Collector, 10 in Single Grouser Track Shoes, Radio Remote Control, 1,008 Engine HoursSerial Number:

2015 SANDVIK DINO DC400RI Drills / Drilling Equipment EARTHMOVING

Prestige Equipment, Inc.

2006 ATLAS COPCO, CM780D Drills - Vertical, Enclosed Cab, Air Conditioner, Pressurized Cab, Cat C13 6 Cylinder 440 hp Diesel Engine, Atlas Copco 10 ft Boom, 27 ft Mast, Rod Changer, Dust Collector, ( 6 ) 3.5 in Drill Rods, 14 in Triple Grouser Track ShoesSerial Number:

2006 ATLAS COPCO CM780D Drills / Drilling Equipment EARTHMOVING

2012 OLDENBURG CANNON, DPI HD RB3 Drills - Vertical, PTO Driven, Rotary Air Drill, Carousel, Straight Down Outriggers, Rear Outriggers, Cat C7 Diesel 225 hp Engine, 12.00-20, PTOSerial Number: 202610

2012 OLDENBURG CANNON DPI HD RB3 Drills / Drilling Equipment EARTHMOVING

2023 CAT MD6200 , BIT BASKET, MANUAL, CAB, PREMIUM, CLIMATE, LEVEL 1, STANDARD, COMPRESSOR (1050 CFM/350 PSI), DECALS (FILMS), ANSI, DUST CURTAIN, W/HYD LIFTERS, LIFTING BAIL, 3", BECO, LIGHTS, LED, PREMIUM, MAST, 36.7', Online Owner's Manual , OVERHEAD WINCH ASSEMBLY, PACKING, PIPE THREAD GREASER, PIPE, 4.5", PRICE 06/28/23 DA (GROUNDWORKS), PROD LINK, DUAL PLE782, SERVICE ENGINEER, SVC PKG, 36', PREMIUM, TOOL PKG, 4.5" PIPE, DTH, WALKWAY, FULL LENGTH CAB-SIDE, WATER INJECT SYS, HIGH VOLUME, WINDOW SHADES,

2023 CAT MD6200 Drills / Drilling Equipment EARTHMOVING

Wheeler Machinery

2012 John Deere, 1590, box_drills, Configuration: No Till, Width: 20, Spacing: 7.5", Scale Tec Scales, Unverferth Fill Auger, , 20' 7.5" spacing like new FILL AUGER WITH SCALES

2012 John Deere 1590 Drills / Drilling Equipment AGRICULTURE

Ag-Pro Of Ottawa

2013 IMT, Unknown, Drilling Equipment, 2013 IMT NXU 1702 PRESS DOWN DRILL, 3700 HOURS, GOOD CONDITION, RUNS AND OPERATES GOOD, WORK READY (VIDEOS AVAILABLE UPON REQUEST)

2013 IMT Unknown Drills / Drilling Equipment EARTHMOVING

Construction Station

2021 FURUKAWA, HCR1450ED II Drills - Vertical, Unit has 2,231 total hours &amp; 1,068 percussion hours.Set up for T51 drill steel.HD828S drifterExcellent condition.Serial Number:

2021 FURUKAWA HCR1450ED II Drills / Drilling Equipment EARTHMOVING

Larmee Equipment & Supply

2020 SOOSAN, JD800E-II Drills - Vertical, 4,149 Engine hours &amp; 1,634 percussion hoursCummins EngineYH80A drifterCurrently set up for T51 drill steelAutomatic rod changerSerial Number:

2020 SOOSAN JD800E-II Drills / Drilling Equipment EARTHMOVING

2014 ATLAS COPCO, FLEXIROC T45 Drills - Vertical, 2014 Year - Atlas Copco FlexiRoc T45-10 Powered by a Caterpillar C9.3 Diesel Engine472 CFM @ 174 PSI onboard Air CompressorCOP3060 Drifter13,219 Total Hours4,922 Percussion HoursSet up for T51 (51mm) Drill SteelNo noticeable Blowby or known issues with Engine. Currently installing a new Auto Greaser. $34,500.00 Just Spent on Rebuilding the COP3060 Drifter rebuilt @ 13,214 engine &amp; 4,921 percussion Hours$14,000.00 spent on replacing track frame bushings and some repairs on undercarriage, performed a factory recommended 1,000 hour total service, and fixed a Rod changer Arm Gripper. This was done @ 12,917 HoursSerial Number:

2014 ATLAS COPCO FLEXIROC T45 Drills / Drilling Equipment EARTHMOVING

2019 FURUKAWA, HCR1450ED II Drills - Vertical, Unit has 4,235 total hoursUnit will be fully cleaned and freshly serviced. Excellent condition.Serial Number:

2019 FURUKAWA HCR1450ED II Drills / Drilling Equipment EARTHMOVING

2009 ATLAS COPCO, ROC D3 RRC Drills - Vertical, - COP 1840HE Drifter- Radio Remote Control- Cummins Tier III EngineSerial Number:

2009 ATLAS COPCO ROC D3 RRC Drills / Drilling Equipment EARTHMOVING

2000 INGERSOLL-RAND, ECM590 Drills - Vertical, - Equipped with YH80A Drifter- Unit needs nothing is currently running on a job at this time. - Has newer paint job - Manual rod changer- Long boomSerial Number:

2000 INGERSOLL-RAND ECM590 Drills / Drilling Equipment EARTHMOVING

2004 INGERSOLL-RAND, ECM590 Drills - Vertical, - Equipped with YH80A Drifter- Mechanic believes there is a broken pin in the fuel injection pump machine will idle but will not idle up. - Other repairs needed are inoperable fuel stop solenoidSerial Number:

2004 INGERSOLL-RAND ECM590 Drills / Drilling Equipment EARTHMOVING

1999 INGERSOLL-RAND, ECM590 Drills - Vertical, - Equipped with YH80A Drifter-Only known issue is the engine Boggs down under a hydraulic pressure load everything works as intended but noticeable lack of performance due to lower engine rpm's . Possible fuel issue -Paint is less than a year old-Manual Rod changerSerial Number:

1999 INGERSOLL-RAND ECM590 Drills / Drilling Equipment EARTHMOVING

2004 INGERSOLL-RAND, ECM590 Drills - Vertical, - Comes with YH70 not currently installed but will be mounted for transport- This unit has tracking issues will move but unknown if it's the final drives or hydraulic motors. - Hammer needs to be mounted back on the machine- Fuel stop solenoid is inoperable - Dust collector needs to be reassembledSerial Number:

2003 INGERSOLL-RAND, ECM590 Drills - Vertical, - Comes with YH70, not currently installed but will be mounted for transport- Batteries need charging or replaced so could not stand machine up at time of photos. - Missing wall and doors need to be reattached - Fuel stop solenoid is inoperable - Hammer needs to be reinstalled - This machine has a bad final drive that needs rebuilt or replaced only one track moves at this time.Serial Number:

2003 INGERSOLL-RAND ECM590 Drills / Drilling Equipment EARTHMOVING

2006 INGERSOLL-RAND, ECM590 Drills - Vertical, - Equipped with YH80A Drifter- Repairs needed or in the process of being repaired - Dust collector top new part has been fabricated need's installed - Rod changer arm is broken have new parts to replace purchased from Larmee equipment - Fuel stop solenoid inoperable - This machine has one new track idler pulley and a new air endSerial Number:

2006 INGERSOLL-RAND ECM590 Drills / Drilling Equipment EARTHMOVING

1997 INGERSOLL-RAND, ECM590 Drills - Vertical, - Equipped with YH80A Drifter- Ready to work- Repairs needed are one door with broken hinges - Fuel stop solenoid - This machine has a new air end and has less than 200 hours on hydraulic pumpSerial Number:

New & Used Drills / Drilling Equipment For Sale

Search Filter

Refine Search

Type

Distance

Listing Type

Category

Make

Model

Price

Condition

Hours

Year

Country

State

City

Class

2001 MSI QI-1000

2022 VERMEER PD5R

2015 SANDVIK DINO DC400RI

2006 ATLAS COPCO CM780D

2012 OLDENBURG CANNON DPI HD RB3

2023 CAT MD6200

2012 John Deere 1590

2013 IMT Unknown

2021 FURUKAWA HCR1450ED II

2020 SOOSAN JD800E-II

2014 ATLAS COPCO FLEXIROC T45

2019 FURUKAWA HCR1450ED II

2009 ATLAS COPCO ROC D3 RRC

2000 INGERSOLL-RAND ECM590

2004 INGERSOLL-RAND ECM590

1999 INGERSOLL-RAND ECM590

2004 INGERSOLL-RAND ECM590

2003 INGERSOLL-RAND ECM590

2006 INGERSOLL-RAND ECM590

1997 INGERSOLL-RAND ECM590