TRANSFER SLAT 400TPH, Stationary (400tph) Transfer Slat Conveyor Inventory #: SL0889 Make: Transfer Slat Conveyer Portability: Stationary Other Info: 400 TPH 36" Slats Double Chain 30 HP Motor with Dodge Reducer

TRANSFER SLAT 400TPH Aggregate Equipment EQUIPMENT

Aggregate Systems Inc

STANSTEEL BUCKET ELEVATOR, Stationary 300tph Stansteel Bucket Elevator Inventory #: BE0373 Make: Stansteel Output: 300tph Stationary Length: 58‘ Other: Box Good Double Chain Reducer (No Motor) Drive Gear 80% Missing 75 Hp Motor but has Fauk Reducer 38.45 Ratio

STANSTEEL BUCKET ELEVATOR Aggregate Equipment EQUIPMENT

Wylie Roadmaster 3140 PlantInventory #: CM1228

Make: Wylie Model: Roadmaster 3140 SN: 16304 Year: 1978 Size: 40 tph

Continuous Mixing Tower

<ul><li>serial number 16304.</li></ul>

Drum

<ul><li>4 x 12 Wylie Drying Drum.</li></ul>

Burner

<ul><li>Hauck TBA 21 10 x 0 x 5</li><li>11 million BTU</li><li>Diesel burner.</li></ul>

Pollution Controls:

<ul><li>High efficiency</li><li>Wylie</li><li>Model: 3140</li><li>ACFM: 18,000</li><li>90 Bags, 6'' x 149'', 11755 sqft filer area</li><li>14 ounce Aramid Felt</li><li>Stationary</li><li>Pulse-jet baghouse</li><li>90 bags, has newer bags</li></ul>

Cold Feed:

<ul><li>Single compartment cold feed bin including adjustable gate for flow control feeding directly into the dryer.</li></ul>

Silos &amp; Drag Conveyor:

<ul><li>Not OFFERED</li></ul>

*Additional silo options may be supplied by ASI for an additional price.

Controls:

<ul><li>Electrical gear protected by NEMA rated panels containing starters/breakers</li></ul>

AC Tank:

<ul><li>One 10,000 gallon</li><li>Electrically heated</li></ul>

NOTES: PLANT NOW ON GROUND, READY FOR LOAD OUT. WELL MAINTAINED. NOT A LOT OF TONNAGE RAN THROUGH POER OWNER. SOME UPGRADES, SOME NEWER MOTORS.

WYLIE ROADMASTER 3140 Aggregate Equipment EQUIPMENT

CH CONTROL HOUSE, Stationary (8‘x20‘) 280 Degree Control House w/mcc Center Inventory #: CON0617 Size: 8‘ x 20‘ Stationary 280 Degree View Structure: Air and Heat Unit This plant was set up to 400 TPH CMI plant with 400 tph Slat, 70,000 ACFM Baghouse, 3 Cold Feed, 1 Rap Feeder, 2 A.C. Tanks M.C. Center Controls: Aesco Madsen Control System Burner Controls 3 Cold feed Bin Controls 1 Rap Bin 2 Silo Load Out A.C. Controls

CH CONTROL HOUSE Aggregate Equipment EQUIPMENT

Stationary (8'x32') Standard Steel Dryer and baghouseInventory #: SND0159

Standard Steel Dryer: 8'x 32' counter flow aggregate dryer (Clean on the inside) Genco Ultra 11 100MBTU Burner, UF11 100, sn UF1264, 5/92, ran on gas Gear drive (Missing 60hp motor) good reducer Breeching dryer relined

Baghouse: Pulse-Jet 60,000 acfm 40 rows of pulsars 2 section baghouse missing fan All connecting duct work unit needs bags and cages replaced

Portable Control Trailer: Box van control room, 2 rooms Gen 111 Burner controls Baghouse controls Start Stop Panels MCC for the components Older Soft Start for baghouse

This is a very nice and clean system plant was run on Nat gas bags in good condition at take down. Dryer shell thick and very clean updated gas burner. This equipment was taken down with the intent of reusing it and was done with great care.

STANDARD STEELE 8 X 30 Aggregate Equipment EQUIPMENT

TRANSFER SLAT 21, Stationary 21‘ (500tph) Transfer Slat Conveyor Inventory #: SL0831 Make: 21‘ Transfer Slat Conveyer Portability: Stationary (Lifting Eyes) Other Info: 500 TPH Double Chain Electric Heated Floor NO DRIVE PACKAGE

TRANSFER SLAT 21 Aggregate Equipment EQUIPMENT

STEP UP CONVEYOR 18, Stationary 18‘ Step Up Slat Conveyor Inventory #: SL0372 Make: Step Up Slat Length: 18‘ Portability: Stationary Other Info: 30" Slats Double Chain Incline Legs No Heat

STEP UP CONVEYOR 18 Aggregate Equipment EQUIPMENT

Stationary Double Deister Screen DeckInventory #: SD0834

Deister Screen Two deck incline bare vibrating screen Has drive guard; coil spring isolation Duel crown screen decks for conventional wire mesh screens Single shaft two bearing oil lubricated vibrator assembly Drive guards, pivoting motor base for electric motor (no motor) Model #BHM-2720 S/N 829991 Date of Mfr: 12-1999.

Approximate Dims: 6'2'' x 9'8''w x 24'4''l (Unit was sunk in the ground a bit, so dimensions are approximate)

DEISTER OTHER Aggregate Equipment EQUIPMENT

1 each - Portable 4 Bin Blending Hopper complete as follows:

a.  Each hopper is 9’-6” wide x 14’ long with 20 tons storage capacity constructed from 1/4” thick steel plate with rectangle tube reinforcing at the hopper top and angle iron reinforcing at the hopper mid-section and bottom section; self-relieving tapered hopper bottom opening to minimize bridging; full length skirtboards with Hercules 3/4" x 6" adjustable rubber flashing to prevent leakage between hopper bottom and belt feeder; adjustable discharge gate with hand crank to control material flow from each hopper.

b. Each belt feeder is 30” wide x 8’ long with 5 h.p. electric motor and Nord helical bevel right angle gearbox; 12” diameter rubber lagged head pulley mounted on Dodge 2-7/16” SCM pillow block bearings; 12” diameter self-cleaning tail pulley mounted on Dodge 2-3/16” SCM pillow block bearings; screw take-up assemblies; CEMA “C” flat belt idlers with 5” diameter rolls mounted on close centers; 3 ply vulcanized endless conveyor belting. Belt speed setup for 90 fpm.

c.  Collecting conveyor is 36” wide with 15 h.p. electric motor and Nord helical bevel right angle gearbox; 16” diameter rubber lagged head pulley mounted on Dodge 2-15/16” SCM pillow block bearings; 14” diameter self-cleaning tail pulley mounted on Dodge 2-7/16” SCM pillow block bearings; screw take-up assemblies; tail terminal guard; head pulley nip guards; CEMA “C” 35 degree troughing idlers with 5” diameter rolls; CEMA “C” return idlers with 5” diameter rolls; 2 ply conveyor belting with 3/16” x 1/16” rubber covers; Flexco 140 mechanical belt splice; 9’-6” long conveyor extension beyond the hoppers. Belt speed setup for 350 fpm.

d.  Portable trailer constructed of heavy duty wide flange beams which are braced for optimum rigidity; wide flange vertical beams and square tube cross members tie all hoppers and trailer together; tandem axle chassis with dual 11 x 22.5 tires, air brakes, king pin, rear lighting, mud flaps and blocking pads. Includes one set of hand crank landing legs at the king pin.

e.  One rust inhibitor prime coat and one finish coat gray paint for all equipment; one finish coat safety yellow paint for all guarding.

f.  Electric motor control panel with main disconnect, AC Tech SMV variable speed drives for each belt feeder, fixed speed starter for 15 h.p. collecting conveyor motor, circuit breaker branch circuit protection, control power transformer, start/stop push buttons for each motor, speed potentiometer for each belt feeder, emergency stop button, selector switch for each belt feeder to run only the desired belt feeders for special blends, all mounted in a NEMA 4 enclosure; includes wiring from each electric motor to the control panel; skid mounted support structure bolted to trailer frame.

CONTACT ASI FOR COST AND LEAD TIME

CF BIN 4 BIN COLD FEED Aggregate Equipment EQUIPMENT

CF BIN 5 BIN COLD FEED, NEW Stationary 5 Bin Cold Feed (9‘6"x14‘) with Control Panel Inventory #: CF0938 12-14 weeks 1 each - Stationary 5 Bin Cold Feed Hopper complete as follows: See ASIEQUIPMENTSALES.COM for more Info

CF BIN 5 BIN COLD FEED Aggregate Equipment EQUIPMENT

CF BIN 3 BIN COLD FEED, Portable 3 Bin Cold Feed (10‘x13‘) Inventory #: CF0606 Number of Bins: 3 Bin Size: 10‘ x 13‘ Portable Other: Variable Speed 24" Feeders 10 HP Motors with Dodge TXM Reducers Motor (Disconnects) Lockouts at Each Bin OSHA Guarding Collecting Conveyor 32" (Missing Drive Package) Tail Roller on Goose neck NO BELT Single Axle Bin Extenders and Dividers

CF BIN 3 BIN COLD FEED Aggregate Equipment EQUIPMENT

COLD FEED BIN SINGLE BIN COLD FEED, NEW Portable 3 Bin Cold Feed (9‘6"x14‘) - 8wk Wait Inventory #: CF0632 1 each - Portable 3 Bin Blending Hopper/Cold Feed System, Model 108-3P complete as follows:

COLD FEED BIN SINGLE BIN COLD FEED Aggregate Equipment EQUIPMENT

CF BIN 2 BIN COLD FEED, NEW Portable 2 Bin Cold Feed (9‘6"x14‘) Inventory #: CF0287 1 each - Portable 2 Bin Blending Hopper, Model 108-2P complete as follows: See ASIEQUIPMENTSALES.COM for More Info

CF BIN 2 BIN COLD FEED Aggregate Equipment EQUIPMENT

HAUCK BURNER, 150MBTU Hauck Burner Inventory #: BN1276 Make: Hauck Model: Eco Star Burner Output: 150 MBTU SN#: ESG-1508-021-06-09-0-00 PRN#: 27200 Natural Gas Other: 100 Hp Motor on Fan Set Up To Run On Nat Gas With Burner Controls (Under Tarp)

HAUCK BURNER Aggregate Equipment EQUIPMENT

COLD FEED BIN SINGLE BIN, NEW Portable Loading Hopper with Feeder (14‘6") Inventory #: CF0892 1 each - NEW Front End Loader Hopper with Belt Feeder, Model 101-36 complete as follows: See ASIEQUIPMENTSALES.COM for more info

COLD FEED BIN SINGLE BIN Aggregate Equipment EQUIPMENT

CMI, EB36 Aggregate Equipment - Other, EBWB 36In Centrifugal DryerSerial Number: 328

CMI EB36 Aggregate Equipment ASPHALT-CONCRETE-COMPACTION

Iron City Supply

1985 P&amp;H ELECTRIC SHOVEL, P&amp;H Electric Shovel Inventory #: B(B1433 Make: P&amp;H Model: 2100 SN: 52340 Year: 1985 Rebuilt: 2007 Hours since 1985: 60,000 Hours since 2007 Rebuild: 500+- Other: Complete Description Upon Request

1985 P&H ELECTRIC SHOVEL Aggregate Equipment EQUIPMENT

2007 EXTEC C10, Extec C10 Tracked Jaw Crusher 1000mm x 650mm  (39 x 25") 2007 ONLY 2000 Hours CAT Engine  Overband Magnet  Tracked  Remote Control

2007 EXTEC C10 Aggregate Equipment EQUIPMENT

DMI Asphalt Equipment LLC

3'' Viking Unloading PumpInventory #: AC2396

Unloading Pump Viking Q-34 (Jacketed Pump) Motor 20HP Mounted on Skid 3'' Unloading Pump

3'' Unloading Pump Viking Aggregate Equipment EQUIPMENT

FAULK REDUCER, (2) Faulk Reducers Inventory #: MG0994 (2) Faulk reducers on skid 1 reducer has 125 hp attached

New & Used Aggregate Equipment For Sale

Search Filter

Refine Search

Type

Distance

Listing Type

Category

Make

Model

Price

Condition

Hours

Year

Country

State

City

Class

TRANSFER SLAT 400TPH

STANSTEEL BUCKET ELEVATOR

WYLIE ROADMASTER 3140

CH CONTROL HOUSE

STANDARD STEELE 8 X 30

TRANSFER SLAT 21

STEP UP CONVEYOR 18

DEISTER OTHER

CF BIN 4 BIN COLD FEED

CF BIN 5 BIN COLD FEED

CF BIN 3 BIN COLD FEED

COLD FEED BIN SINGLE BIN COLD FEED

CF BIN 2 BIN COLD FEED

HAUCK BURNER

COLD FEED BIN SINGLE BIN

CMI EB36

1985 P&H ELECTRIC SHOVEL

2007 EXTEC C10

3'' Unloading Pump Viking

FAULK REDUCER