location_lockdown

referral_links

gallery_videos

phone_override

Sunrise Equipment Company

This is a 1991 Ford F-800 cab and chassis. The snow plow on the back is not included. SR# 2359

 

As-Is. Does not run. We cannot get it running at this time &amp; do not have the manpower to get it running. Must be towed away or we can help load on the trailer.

1991 FORD F800 Cab & Chassis Trucks TRUCK

This is a 2025 Freightliner 114SD Plus cab and chassis. This truck is powered by a Detriot 12.8L DD13 Gen 5 6-cylinder diesel engine pushing 320 HP backed by a Detroit 5-speed automatic transmission. This truck is equipped with 20,000 lbs front axles, Meritor 46,000 lbs rear axles and a total GVWR of 66,000 lbs. This truck has a 3/8″ single frame. 3.58 Rear Axle Ratio

Wheel Base: 220″ Cab to end of frame: 210″ Center Front axle to Center Front Rear Axle: 198″ Center Front Wheel To Rear Rear Axle: 246″ Trunnion to End Of Frame: 76″

This truck suffered minor rear wheel and tire damage while in transit when originally purchased new. This truck has a clean and clear title.

This truck is ideal for a range of conversions that allow it to adapt to specific industries such as a dump truck, concrete mixer, tanker truck, vacuum truck, heavy tow truc/wrecker or utility truck this truck will be a versatile addition to any fleet.Vehicle Specifications

Stock Number:

4406

Vin:

1FVHG3DVXSHVP5107

Year:

2025

Make:

Freightliner

Model:

114SD Plus

Miles:

21

Engine:

Detroit DD13 12.8L Diesel Engine (SN- 47195251160677)

Transmission:

Detroit 5-Speed Automatic Transmission (SN- 716350E0342689)

Horsepower:

320

Front Tires:

425/65 R 22.5

Rear Tires:

11R 22.5

Front Axle:

20,000 lb

Rear Axle:

23,000 Inner &amp; 23,000 Rear

Brakes:

Air

GVWR:

66,000

Wheels:

10 Hole Motor

CA CT:

134"

Other:

A/C, AM/FM/Bluetooth, 2-Bucket Seats, 1-100 Gallon Fuel Tank, Power Windows, Locks &amp; Mirrors

2025 FREIGHTLINER 114 SD Cab & Chassis Trucks TRUCK

This is a 2025 Freightliner M2 cab &amp; chassis. This truck is powered by a 7.7L DD8 Detriot Diesel pushing 300HP backed by a 6-speed Allison 3000RDS_P Automatic Transmission including a 1710 series half round yoke, TC418 torque converter, engine driven PTO provision, and 4″ sump with oil level sensor w prognostics. This truck has a 14,000 lbs front axle and 20,000 lbs each rear axles.

Wheelbase: 297″ Back Of Cab To End Of Frame: 368″ Back Of Cab To Front Tandem Axle: 204″ Back Of Cab To Rear Tandem Axle: 254″ Back Of Cab To Trunnion: 230″ Trunnion To End Of Frame: 138″ Front Axle To Front Tandem Axle: 272″ Front Axle To Rear Tandem Axle: 323″

SR# 4381

 Vehicle Specifications

Stock Number:

4381

Vin:

1FVHCYD23SHVG0720

Year:

2025

Make:

Freightliner

Model:

M2 106

Miles:

10

Engine:

7.7L Detroit Diesel DD8

Transmission:

6-Speed Allison 3000RDS_P Automatic Transmission (SN- 6512019412)

Horsepower:

300 HP

Front Tires:

295/75R22.5

Rear Tires:

11R 22.5

Front Axle:

14,000 lbs

Rear Axle:

20,000 Inter 20,000 Rear

Brakes:

Air

GVWR:

54,320

Wheels:

10 Hole Motor

CA CT:

230"

Other:

A/C, AM/FM/Bluetooth, 2 Bucket Seats, 2 Fuel Tanks, Power Windows, Power Locks &amp; Power Mirrors

2025 FREIGHTLINER BUSINESS CLASS M2 106 Cab & Chassis Trucks TRUCK

This is a 2025 Freightliner Cascadia 116″ Day Cab with a 5th wheel hitch. This truck is powered by a 525 HP 12.8L 6 cylinder Detroit diesel engine and a Detroit DT12 automated/manual transmission with a 3.42 rear axle ratio.

This truck features: Engine: DDE RT DD13 (SN# 471952S1174405) Transmission: Detroit DT12 (Model: D716350) (SN# 716350E0349304) Front Axle: MBA D739912 12,500 lbs Front (Component Model: F125-3N) Rear Axles: Meritor 40,000 lbs Rear (Component Model: MP-20-14X) Suspension: Airliner Leaf Wheelbase: 186″ CT: 124″ 276″ Rail Length GVWR: 52,500 Differential Lock: Yes Frame: Single Frame 1/4″ Thick

This is a brand new unit that sustained minor damage to the front bumper, headlight, and hood out for delivery to a new truck dealer.  The parts that were damaged were replaced with new factory original parts.  The truck has a clean title but the truck will not have any factory warranty. There is additional warranties that can be purchased by third party companies for an additional cost if desired. Call today and we can get you in touch with them directly. This truck runs and drives great and is available now!!

 Vehicle Specifications

Stock Number:

4412

Vin:

3AKJHTDVXSDVX8615

Year:

2025

Make:

Freightliner

Model:

CASCADIA PE116DC

Miles:

760

Engine:

12.8L Detroit DD13 Diesel Engine

Horsepower:

525

Transmission:

Detroit DT12 On-Highway Automated Manual Transmission

Front Axle:

12,500

Rear Axle:

20,000 Inter 20,000 Rear

Front Tires:

295-75R 22.5

Rear Tires:

295-75R 22.5

Wheels:

10 Hole Motor

Other:

A/C, AM/FM/Bluetooth Radio, 2 Bucket Seats, 5th Wheel Hitch, Trailer Brakes, Power Windows, Power Locks, Power Mirrors

GVWR:

52,500

CA CT:

124"

Brakes:

Air

SR# 4412

2025 FREIGHTLINER CASCADIA 116 Day Cab Trucks TRUCK

This is a 98′ A77-TE93 boom which features a 7 foot telescopic upper boom and elevator that is mounted on a 2015 International 7400 SBA 6×6 chassis. This truck is equipped with a 7.6L diesel engine backed by a 5 speed Allison automatic transmission. SR# 4415

 Vehicle Specifications

Make:

International

Year:

2015

Model:

7400 SFA 6X6

Hours:

4,000

Wheels:

10 Hole Motor

Other:

A/C, AM/FM Radio, 1 Bucket &amp; 1 Bench Seat, 2 Strobe Lights, 1-50 Gallon Fuel Tank, Pintle Hitch, Trailer Brakes

Front Tires:

385/65R22.5

Rear Tires:

11R 22.5

GVWR:

58,000

Transmission:

Allison 6-Speed Automatic (SN- 6611214598)

CA CT:

186"

Front Axle:

18,000 lbs

Rear Axle:

20,000 Inter 20,000 Rear

Brakes:

Air

Horsepower:

300 HP

Engine:

Maxxforce 7.6L

Miles:

28,421Equipment Specifications

Make:

Altec

Model:

A77-TE93

Other:

Pistol grip controls, tool circuits

Mount:

Center Over Rear Axle

Insulated:

Yes

Out Riggers:

4

Capacity:

Jib- 1,000 lbs

Work Height:

98'

Bucket:

2 Man Bucket 800 lbs Capacity

2015 INTERNATIONAL 7400 Bucket Truck LIFTING

This is a 55′ Terex Telelect TL50M mounted on a 2004 International 4400 SBA 4×2 chassis. The truck is powered by a powerful International DT466 engine backed by a reliable 6-speed Allison automatic transmission. With only 46,509 miles, this truck offers both durability and low miles. The truck was previously owned by a large electric utility company with a great fleet maintenance program. This truck is perfect for electric utility work, maintenance, tree care and other high-reach applications. SR #4416

 Vehicle Specifications

Brakes:

Air

CA CT:

CA 102"

Engine:

International CH250 DT466 7.6L Diesel Engine

Front Axle:

12,000 lbs

Front Tires:

11R 22.5

Horsepower:

250

Make:

International

Miles:

46,509

Model:

4400 4x2

Other:

A/C, 2 Bucket Seats, 2 Strobe Lights, 2 Spotlights, Inverter, 1-55 Gallon Fuel Tank, Pintle Hitch, Trailer Brakes

Rear Axle:

21,000 lbs

Rear Tires:

11R 22.5

Stock Number:

4416

Transmission:

Allison 6-Speed Automatic Transmission

Wheels:

10 Hole Motor

Year:

2004

Hours:

4,322Equipment Specifications

Bucket:

2 Man rotating

Capacity:

400 Lbs.

Hours:

1,133

Insulated:

Yes- 46 kV and Below

Make:

Terex-Hi Ranger

Material Handling:

Yes 1,000 lbs Capacity

Model:

TL50M

Mount

Center Behind Cab

Other:

Pistol Grip Controls, Tool Circuits, A/C Power

Out Riggers:

2

Work Height:

55'

Year:

2004

2004 INTERNATIONAL 4300 Bucket Truck LIFTING

Introducing the John Deere 872G grader, a powerful and versatile machine designed for high-performance grading applications. Equipped with a robust John Deere 6090HD 9.0L diesel engine, this grader delivers approximately 300hp and exceptional torque, making it ideal for tackling tough grading tasks. With a fully automatic Powershift transmission, the operators can seamlessly shift through 8 forward and 8 reverse gears ensuring smooth and efficient operation. The 872’s 16’x 24″ belly blade is capable of rotation and adjustable depth control, allowing for precise grading in various conditions.

This grader is equipped with a Henke Manufacturing 12′ x 36″ side wing blade, a versatile and durable attachment attachment ideal for a variety of applications, including snow removal, grading, and landscaping. This heavy-duty 12′ blade ensures optimal performance in tough conditions. Constructed from high-strength steel, it features an adjustable angle for precise grading and hydraulic operation for easy adjustments right from the cab. The Henke side blade excels in performance capabilities, making it suitable for municipal snow removal and utility maintenance. It’s replaceable cutting edges enhances longevity, ensuring that it remains effective even with regular use. This blade is compatible with a range of machinery, including graders and loaders, allowing for seamless integration into existing equipment.

The grader boasts a spacious, climate-controlled cab that prioritizes operators comfort, featuring ergonomic controls and excellent visibility. The advanced hydraulic system enhances blade responsiveness, while JDLink connectivity provides real-time monitoring for increased efficiency. This 872GP delivers stability and maneuverability on the jobsites.

The John Deere 872G grader is an indispensable tool for a wide array of applications, making it an essential investment for contractors, municipalities, and agricultural operators. Whether you’re involved in road construction, land leveling, or snow removal, this grader excels in providing precise and efficient grading solutions. It’s robust capabilities ensure smooth, stable surfaces for new roadways and expertly graded sites for construction projects. Additionally, it’s perfect for maintaining drainage ditches and spreading materials evenly, crucial for effective land management and agricultural operations.

This grader is also equipped with a Balderson style John Deere front lift attachment making this a versatile tool for different jobs quick and easy. The front quick attach lift plus the hydraulic quick attachments make adding attachments easy. This includes but not limited to front push block, V-type front scarifier, or dozer blade.

2018 JOHN DEERE 872G Graders EARTHMOVING

Introducing the John Deere 872GP grader, a powerful and versatile machine designed for high-performance grading applications. Equipped with a robust John Deere 6090HD 9.0L diesel engine, this grader delivers approximately 300hp and exceptional torque, making it ideal for tackling tough grading tasks. With a fully automatic Powershift transmission, the operators can seamlessly shift through 8 forward and 8 reverse gears ensuring smooth and efficient operation. The 872’s 16’x 24″ belly blade is capable of adjustable depth control, allowing for precise grading in various conditions.

This grader is equipped with a Henke Manufacturing 12′ x 36″ side wing blade (SN-35974), a versatile and durable attachment ideal for a variety of applications, including snow removal, grading, and landscaping. This heavy-duty 12′ blade ensures optimal performance in tough conditions. Constructed from high-strength steel, it features an adjustable angle for precise grading and hydraulic operation for easy adjustments right from the cab. The Henke side blade excels in performance capabilities, making it suitable for municipal snow removal and utility maintenance. It’s replaceable cutting edges enhances longevity, ensuring that it remains effective even with regular use. This blade is compatible with a range of machinery, including graders and loaders, allowing for seamless integration into existing equipment.

Where precision matters, this six-wheel drive model precision mode allows the operator to manage a consistent speed via a dial switch instead of an inching pedal, maximizing productivity in all soil conditions. Six-wheel drive is adjustable on the fly to capably traverse difficult jobsites. Automatic dual-path hydrostatic drive, increases tractive efforts and front-end control; includes separate left and right systems with variable-displacement pumps, axial-piston wheel motors, and freewheel at transport speeds; operator-selectable 15-position rotary aggressiveness control and inching capability down to 0 MPH; precision mode 

The John Deere 872GP grader is an indispensable tool for various applications, making it an essential investment for contractors, municipalities, and agricultural operators. Whether you’re involved in road construction, land leveling, or snow removal, this grader excels in providing precise and efficient grading solutions. It’s robust capabilities ensure smooth, stable surfaces for new roadways and expertly graded sites for construction projects. Additionally, it’s perfect for maintaining drainage ditches and spreading materials evenly, crucial for effective land management and agricultural operations. Precision Mode Effective Gears: 1-3 forward only Operating Speeds: 0.4-8.0km/h (0.25-5.0MPH) Hydrostatic Pumps (2 each): 3.7 cu. in. Wheel Motors: 3.7 cu.in. Final Reduction: 38:7:1

AM/FM/Bluetooth Radio

1 Bucket (Heated) Seat

A/C

2023 JOHN DEERE 872GP Graders EARTHMOVING

This is a 55′ Altec AM50 on a 2012 International 7400 4X4 chassis.  The truck has a MaxxForce diesel engine and a 5-speed Allison transmission. The truck was previously owned by a large electric utility company with a great fleet maintenance program. SR# 4314

Vehicle Specifications

Year:

2012

Make:

International

Model:

7400 4x4

Miles:

127,690

Engine:

MaxxForce

Front Axle:

16,000

Rear Axle:

20,000

Front Tires:

315-80 22.5

Rear Tires:

12R 22.5

Brakes:

Air

CA CT:

114"

Other:

A/C, AM/FM/Bluetooth Radio, 2 Bucket Seats, 2 Strobe Lights, 2 Spotlights, 1-50 Gallon Fuel Tank, Pintle Hitch, Trailer Brakes

Stock Number:

4314

Transmission:

Allison Automatic Transmission

Wheels:

10 Hole Motor

Horsepower:

TBD

GVWR:

36,000Equipment Specifications

Year:

2011

Make:

Altec

Model:

AM50

Sheave Height:

50'

Work Height:

55'

Capacity:

800 lbs

Mount:

Center Over Rear Axle

Insulated:

Yes

Out Riggers:

4

Bucket:

2 Man rotating 800lb capacity bucket

Hours:

1,146

Material Handling:

yes 2,000 lb jib

Other:

Pistol Grip Controls, Tool Circuits, Platform Elevator

2012 INTERNATIONAL 7400 Bucket Truck LIFTING

This is a 98′ A77-TE93 boom which features a 7 foot telescopic upper boom and elevator that is mounted on a 2014 International 7400 SBA 6×6 chassis. This truck is equipped with a 7.6L diesel engine backed by a 5 speed Allison automatic transmission. SR# 4365Vehicle Specifications

Make:

International

Year:

2014

Model:

7400 SBA 6x6

Hours:

4,207

Wheels:

10 Hole Motor

Other:

A/C, AM/FM Radio, 1 Bucket Seat &amp; 1 Bench Seat, 2 Strobe Lights, Inverter, 1-50 Gallon Fuel Tank, Pintle Hitch, Trailer Brakes

Front Tires:

385-65-22.5

Rear Tires:

11R 22.5

GVWR:

58,000

Transmission:

Allison 5-Speed Automatic

CA CT:

188"

Front Axle:

18,000 lbs

Rear Axle:

20,000 Inter 20,000 Rear

Brakes:

Air

Horsepower:

300 HP

Engine:

Maxxforce 7.6L

Miles:

32,027Equipment Specifications

Make:

Altec

Model:

A77-TE93

Hours:

2,777

Serial #:

1113CT1901

Other:

Pistol grip controls, tool circuits

Mount:

Center Over Rear Axle

Insulated:

Yes

Out Riggers:

4

Capacity:

Jib- 1,000 lbs

Work Height:

98'

Bucket:

2 Man rotating 800lb capacity bucket

2014 INTERNATIONAL WORKSTAR 7400 Bucket Truck LIFTING

This is an Altec D4065A TR on a 2009 International 7400 SBA 6×4 chassis. This truck is equipped with a 300 HP MaxxForce diesel engine, boasting only 13,332 miles, and is complemented by a 5-speed Allison automatic transmission for reliable performance. This truck has a twin steering gearbox. The boom features a 29,310 lb capacity, 65′ sheave height composed of three sections, pole claws, and rear winch. This truck has extremely low hours showing only 1,789 engine hours and 790 PTO hours. The rear suspension of this truck features a leaf suspension system, with the inner and rear axles rated for a maximum capacity of 46,000 lbs.Vehicle Specifications

Year:

2009

Make:

International

Model:

7400 SBA 6x4

Brakes:

Air

Engine:

International 7.6L GDT 300 Diesel Engine (SN- 466HM2U3049353)

Miles:

13,332

Front Axle

16,000 lb

Rear Axle:

46,000 Tandem

GVWR:

56,000

Wheels:

10 Hole Motor

Front Tires:

315-80 22.5

Rear Tires:

12R 22.5

CA CT:

156"

Other:

A/C, 2 Bucket Seats, 2 Strobe Lights, 1-50 Gallon Fuel Tank, Pintle Hitch, Trailer Brakes

Horsepower:

300

Transmission:

Allison 5-speed automatic transmission (SN- 6510829060)

Hours:

1,789

Stock Number:

4398Equipment Specifications

Make:

Altec

Model:

D4065A TR

Serial #:

1008DF0291

Sheave Height:

65'

Kelly Bar(in):

2-1/2

Capacity:

29,310

Mount:

Center over Rear Tandem

Insulated:

Yes- 46 kV and Below

Hours:

790

Other:

Joystick Controls, Tool Circuits, Hydraulic Hose Reel

Out Riggers:

4

Work Height:

65'

2009 INTERNATIONAL WORKSTAR 7400 Digger Derricks EARTHMOVING

This is a 60′ Terex Commander 6060 on a 2008 International 7400 SFA 6×6 chassis. This truck is equipped with a 285 HP International GDT 285 diesel engine backed by a 5-speed Allison automatic transmission, leaf suspension, 5.86 axle ratio &amp; differential lock. The 3-section fully hydraulic boom features a riders seat, 2-speed digger &amp; pole claws.

 Vehicle Specifications

Year:

2008

Make:

International

Model:

7400 SFA 6X6

Vin:

1HTWJAAR88J697906

Brakes:

Air

Engine:

International 7.6L GDT285 (SN- 466HM2U3026389)

Miles:

39,499

Front Axle:

16,000 lb

Rear Axle:

Meritor 18,740 Inner &amp; Meritor 18,740 Rear

GVWR:

53,480

Wheels:

10 Hole Motor

Front Tires:

385/65R 22.5

Rear Tires:

11R 22.5

CA CT:

154"

Other:

A/C, AM/FM/Weather, 1 Bucket &amp; 1 Bench Seat, 1 Strobe Light, 1-50 Gallon Fuel Tank, Pintle Hitch, Trailer Brakes

Horsepower:

285

Transmission:

Allison 5-Speed Automatic

Hours:

9,481

Stock Number:

4393Equipment Specifications

Make:

Terex

Model:

Commander C6060

Serial #:

2080435678

Year:

2008

Sheave Height:

60'

Kelly Bar(in):

2-5/8"

Capacity:

37,800

Mount:

Center Over Rear Axle

Insulated:

Yes

Hours:

6,423

Other:

T-Bar &amp; Lever Controls, Tool Circuits, Hydraulic Hose Reel

Out Riggers:

4

Work Height:

60

2008 INTERNATIONAL 7400 Digger Derricks EARTHMOVING

This is a 50′ Terex Commander C5050 on a 2012 International 7600 6×4 chassis. This truck is equipped with a 390 HP MaxxForce 11 diesel engine, boasting just 30,000 miles, and is complemented by a 6-speed Allison automatic transmission for reliable performance. This truck has a front bumper winch with capstan, directional bar on the rear, backup camera, air hose reel and double gearbox steering. The boom features a 30,000 lb capacity, 3 section boom has a 50′ sheave height, pole claws, and rear winch. This truck has extremely low hours showing only 2,751 engine hours and 1,287 PTO hours. The rear suspension of this truck features a Hendrickson leaf suspension system, with the inner and rear axles rated for a maximum capacity of 46,000 lbs and 6.14 axle ratio.

 Vehicle Specifications

Year:

2012

Make:

International

Model:

7600 SBA 6x4

Brakes:

Air

Engine:

10.9L MaxxForce 11 Diesel Engine (SN- 1S106HM2Y4115535)

Miles:

30,707

Front Axle:

16,000 lb

Rear Axle:

20,000 lb Meritor Inner &amp; 20,000 Meritor Rear

GVWR:

56,000

Wheels:

10 Hole Motor

Front Tires:

315-80 22.5

Rear Tires:

11R 22.5

CA CT:

152"

Other:

A/C, AM/FM Radio, 2 Bucket Seats, 1 Spotlight, Inverter, 1-70 Gallon Fuel Tank, Pintle Hitch, Trailer Brakes

Horsepower:

390 HP

Transmission:

Allison 6-speed automatic (SN 6610319572)

Hours:

2,751

Stock Number:

4392Equipment Specifications

Make:

Terex

Model:

Commander C5050

Serial #:

2110143246

Year:

2011

Sheave Height:

50'

Kelly Bar(in):

2-5/8"

Capacity:

30,000 lbs

Mount:

Center Over Rear Axle

Insulated:

Yes

Hours:

1,287

Other:

Tool Circuits, A/C Power, Hydraulic Hose Reel, Air Hose Reel, Van Air Compressor (PTO Driven)

Out Riggers:

4

Work Height:

50'

2012 INTERNATIONAL 7600 Digger Derricks EARTHMOVING

This is a 47′ Altec DM47B-TR on a 2016 International Workstar 7300 4×4 chassis. This truck is equipped with a Maxxforce DT diesel engine, boasting only 41,000 miles, and is complemented by a 5-speed Allison automatic transmission for reliable performance. The truck features a 13,000lbs Fabco front axle and a 20,000lbs Blue Diamond rear axle for a total of a 33,000lbs GVWR. The boom features a 23,790 lb capacity, 3 section boom has a 47′ sheave height, and pole claws.

 Vehicle Specifications

Year:

2016

Make:

International

Model:

7300 4x4

 

Brakes:

Air

Engine:

Maxxforce DT Diesel

Miles:

41,366

Front Axle:

13,000

Rear Axle:

20,000

Front Tires:

11R 22.5

Rear Tires:

11R 22.5

CA CT:

128"

Horsepower:

260

Hours:

4,404

Wheels:

10 Hole Motor

Other:

A/C, AM/FM/Bluetooth Radio, 1 Bucket Seat &amp; 1 Bench Seat, 2 Strobe Lights, Pintle Hitch, Trailer Brakes

Transmission:

5-speed Allison automatic transmission (SN- 6511281726)

GVWR:

33,000

Stock Number:

4401Equipment Specifications

Make:

Altec

Model:

DM47B-TR

Serial #:

0215FR1741

Hours:

1,911

Sheave Height:

47'

Capacity:

23,790

Mount:

Center Over Axle

Insulated:

Yes- 46 kV and Below

Kelly Bar(in):

2.5"

Out Riggers:

4

Other:

Lever Controls, Tool Circuits, Hydraulic Hose Reel

2016 INTERNATIONAL 7300 Digger Derricks EARTHMOVING

This is a 47′ Altec DM47B-TR on a 2016 Freightliner M2 106 chassis. This truck is equipped with a Cummins 6.7L diesel engine, boasting just 66,226 miles, and is complemented by an Allison automatic transmission for reliable performance the truck has a Muncie PTO located on the drivers side. Thes boom features a 23,790 lb capacity, 3 section boom has a 47′ sheave height, pole claws, and rear winch.Vehicle Specifications

Year:

2016

Make:

Freightliner

Model:

M2 106

Brakes:

Air

Engine:

Cummins 6.7L Diesel Engine (SN- 73793480)

Miles:

66,226

Front Axle:

13,220

Rear Axle:

21,0000 lbs (Meritor)

GVWR:

33,000

Wheels:

10 Hole Motor

Front Tires:

11R 22.5

Rear Tires:

11R 22.5

CA CT:

122"

Other:

A/C, AM/FM Radio, 1 Bucket Seat &amp; 1 Bench Seat, 1 Strobe Light, 1-50 Gallon Fuel Tank, Pintle Hitch, Trailer Brakes

Transmission:

Allison 5-speed Allison Automatic Transmission (SN- 6511282825)

Hours:

2,630

Stock Number:

4400

Horsepower:

250Equipment Specifications

Make:

Altec

Model:

DM47B-TR

Serial #:

0315FR1774

Sheave Height:

47'

Work Height:

47'

Kelly Bar(in):

2-1/2

Capacity:

23,790

Mount:

Center over rear wheel

Insulated:

Yes

Hours:

TBD

Out Riggers:

4

Other:

Joystick Controls, Tool Circuits, Hydraulic Hose Reel

2016 FREIGHTLINER BUSINESS CLASS M2 106 Digger Derricks EARTHMOVING

This is a Terex Hi-Ranger TM105 articulating &amp; telescopic material handling bucket truck with a two man fiberglass bucket, a two man wire basket, and 4 hydraulic outriggers. This is rear mounted on a 2012 International 7400 6×6 Workstar chassis. This truck is powered by a MaxxForce 9.3L diesel and an automatic transmission. This southern truck was previously owned by a large utility company in Florida.

 Vehicle Specifications

Brakes:

Air

Engine:

Maxx Force 9.3L Diesel

Make:

International

Model:

7400 6X6

Other:

AM/FM, A/C, Pintle Hitch, Trailer Brakes

Stock Number:

4008

Year:

2012

Front Axle:

20,000 lb

Front Tires:

425-65-R22.5

CA CT:

CT=180"

Transmission:

5 Speed Automatic Allison

Wheels:

10 Lug Motor

Miles:

45,935

Rear Axle:

20,000 Inter 20,000 Rear

Rear Tires:

295-75-R22.5

Horsepower:

320Equipment Specifications

Bucket:

2 Man

Make:

Terex-Hi Ranger

Model:

TM105

Mount:

Rear Center

Out Riggers:

4

Work Height:

110 ft

Year:

2012

Insulated:

Yes

Serial #:

2110744246

Capacity:

2 Man 800 Lbs

Hours:

PTO- 3,014

SR# 4008

This is a 62′ Altec AA55E mounted on a 2019 International 7500 6×4 chassis. This is a 60′ working height boom that includes a 2′ elevator to give you a total of 62′ of working height. The truck has an 8.9L engine and an Allison 5-speed automatic transmission. 

Vehicle Specifications

Brakes:

Air

CA CT:

124"

Engine:

8.9L Diesel

Front Axle:

14,000

Front Tires:

12R 22.5

Horsepower:

370

Hours:

n/a

Make:

International

Miles:

52,065

Model:

7500 6x4

Rear Axle:

20,000 Inter 20,000 Rear

Rear Tires:

11R 22.5

Stock Number:

4258

Transmission:

6-Speed Allison Automatic

Wheels:

10 Hole Motor

Year:

2019Equipment Specifications

Capacity:

600 Lbs

Insulated:

Yes

Make:

Altec

Material Handling:

N/A

Model:

AA55E

Mount:

Center Rear

Other:

Pistol grip controls, Tool circuit

Out Riggers:

4

Serial #:

0419FH7792

Work Height:

62'

Year:

2019

Bucket:

2 Man rotating bucket

2019 INTERNATIONAL 7500 Bucket Truck LIFTING

This is a 60′ Terex Hi-Ranger mounted on a 2007 Ford F750.  The truck is powered by a Cat C7 diesel engine and a 6-speed manual transmission. SR# 4255

 

Brakes:

Air

CA CT:

138"

Engine:

Cat C7

Front Axle:

12,000 lbs

Front Tires:

11R 22.5

Horsepower:

210 hp

Make:

Ford

Miles:

68,857

Model:

F750 4X2 Super Duty

Other:

1 Bucket &amp; 1 Bench Seat, Pintle Hitch, Trailer Brakes

Rear Axle:

21,000 lbs

Rear Tires:

11R 22.5

Stock Number:

4255

Transmission:

6-Speed Manual

Vin:

3FRXF75N77V477278

Wheels:

10 Hole Motor

Year:

2007

GVWR:

25,999Equipment Specifications

Bucket:

Single Man Bucket

Capacity:

1 man 350lb capacity

Insulated:

Yes

Make:

Terex

Material Handling:

No

Model:

Hi-Ranger XT55

Mount:

Front, Center

Other:

pistol grip controls

Out Riggers:

2

Work Height:

60'

Hours:

N/A

Serial #:

2070734620

Year:

2007

2007 FORD F750 Bucket Truck LIFTING

This is an Altec AC26-95 mounted on a 2008 International 7400 6×4 chassis. 100′ aerial platform 42′ jib available from manufacture in separate purchase for a total 140 total height. Remote controls, 5 outriggers, insulated man basket, 26-ton lifting capacity. The truck has a 9.3L diesel engine and an Allison 5-speed automatic transmission and only has roughly 26,753 miles.  This truck was previously owned by a large electric utility company with a great service program! We installed a new remote system on this truck. This truck has been reconditioned and looks like new. SR# 4263

Brakes:

Air

CA CT:

192"

Engine:

9.3L Diesel

Front Axle:

20,000 Lbs

Front Tires:

425-65R 22.5

Horsepower:

310 HP

Hours:

n/a

Make:

International

Miles:

26,753

Model:

7400 6x4

Rear Axle:

23,000 Inner &amp; 23,000 Rear

Rear Tires:

11R 22.5

Stock Number:

4263

Transmission:

Allison Automatic 5 Speed

Vin:

1HTWGAZTX8J650813

Wheels:

10 Hole Motor

Year:

2008

GVWR:

66,000

Other:

A/C, AM/FM/Weather Radio, 2 Bucket Seats, 1 Spotlight, 1-50 Gallon Fuel Tank, Pintle Hitch, Trailer Brakes, Power Window, Locks &amp; MirrorsEquipment Specifications

Insulated:

No

Make:

Altec

Material Handling:

N/A

Model:

AC26-95

Mount:

Center Behind Cab

Other:

Joystick Controls with Levers, Hydraulic Hose Reel

Out Riggers:

4

Serial #:

0907EH0216

Work Height:

95'

Year:

2007

Bucket:

2 Man Basket- Non Rotating

2008 INTERNATIONAL 7400 Crane Truck LIFTING

This is a 145′ Elliott E-145 mounted on a 2016 Freightliner M2 6×6 chassis. This truck is powered by a Cummins ISL9 engine and 6-Speed automatic transmission. Elliott’s E145 E-line features a 145′ working height and 36″x72″ two-man work platform with a 1,200 lbs capacity.

 Vehicle Specifications

Brakes:

Air

CA CT:

198"

Engine:

Cummins 8.9L ISL 9 Diesel Engine

Front Axle:

18,000 lbs

Front Tires:

385-65-22.5

Horsepower:

350

Make:

Freightliner

Model:

M2 6x6

Miles:

24,827

Other:

AM/FM/WX/CD/Bluetooth, 1 Bucket Seat, 1 Bench Seat, 1-50 Gallon Fuel Tank, Power Windows, Locks

Rear Axle:

Tandem- 40,000 lbs

Rear Tires:

11R 22.5

Stock Number:

4304

Transmission:

Allison 6-speed automatic

Vin:

1FVKCYCY5GHGV5614

Wheels:

10 Lug Motor

Year:

2016Equipment Specifications

Bucket:

Platform Basket

Capacity:

18,000

Insulated:

No

Make:

Elliott

Material Handling:

No

Model:

E-145

Mount:

Center over rear axles

Other:

Lever Controls, Remote, Tool Circuits, Hydraulic Hose Reel

Out Riggers:

4

Serial #:

006238

Work Height:

145'

Year:

2015

Work Height: 145′ Working Side Reach: 80′ Boom Sections: 5 Platform Type: Yoke-Mount Platform Capacity: 1,200lb Platform Size: 36″x72″ Main Winch Capacity: 18,000 lb Outrigger Type Front: Out-Down Outrigger Spread Front: 21’2″ Outrigger Type Rear: Out-Down Outrigger Spread Rear: 21’2″

Sunrise Equipment Company

Search Filter

Refine Search

Type

Distance

Listing Type

Category

Make

Model

Price

Condition

Hours

Year

Country

State

City

Class

1991 FORD F800

2025 FREIGHTLINER 114 SD

2025 FREIGHTLINER BUSINESS CLASS M2 106

2025 FREIGHTLINER CASCADIA 116

2015 INTERNATIONAL 7400

2004 INTERNATIONAL 4300

2018 JOHN DEERE 872G

2023 JOHN DEERE 872GP

2012 INTERNATIONAL 7400

2014 INTERNATIONAL WORKSTAR 7400

2009 INTERNATIONAL WORKSTAR 7400

2008 INTERNATIONAL 7400

2012 INTERNATIONAL 7600

2016 INTERNATIONAL 7300

2016 FREIGHTLINER BUSINESS CLASS M2 106

2012 INTERNATIONAL 7400

2019 INTERNATIONAL 7500

2007 FORD F750

2008 INTERNATIONAL 7400

2016 FREIGHTLINER BUSINESS CLASS M2 106